Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Orlando, FL | Mortons Air Duct Orlando
Trane air duct cleaning in Orlando costs between $425 and $780 for a full system on most single-family homes, depending on the number of return and supply runs and how much debris has accumulated in the coil and blower. We provide independent Trane service across Orlando, not manufacturer-authorized work, which means we fix what’s actually failing in your ducts and air handler rather than following a script. The thing that makes our Trane work different here is simple: we know how Orlando’s humidity loads a Trane coil with biofilm, and we clean it accordingly. Call (321) 204-8194 for a written estimate before any tools come off the truck.
Our team works on Trane systems across Orlando every day, so we know exactly how Trane’s high-efficiency coil and blower designs trap fine dust and moisture in Florida attics. We own the specialized agitation, negative-air, and video-inspection tools to clear them without damaging the ductwork. For a full picture of the Trane equipment we handle, see our Trane sales & service overview, and for coverage beyond the city limits, check the Orlando service area page.
Why Orlando Residents Choose Us for Trane Service
Familiarity matters more than most people realize. A Trane Hyperion air handler is not a generic air handler. Its all-aluminum coil has tight fin spacing that catches fine dust differently than older copper coils, and blasting it with the wrong pressure can bend fins and make airflow worse. Paul Adeyemi, owner of Mortons Air Duct Orlando, learned this the hands-on way studying HVAC technology at Los Angeles Trade-Technical College, where he picked up the habit of inspecting before cleaning. That habit stayed with him through nearly two decades of cleaning and inspecting duct systems across Orlando, including homes near College Park where older construction hides more dust than homeowners expect.
We use OEM Trane filters, gaskets, and access panels whenever possible to keep fit and airflow correct. For duct sealing and insulation, though, we rely on commercial-grade mastic and closed-cell foam that outperform original builder materials in Orlando’s humid attics. Our crews from Morton’s Air Duct Cleaning arrive in uniform, background-checked, and carrying Rotobrush and Nikro equipment, not entry-level rental gear. Shoe covers and drop cloths go down before the first panel comes off. Every job carries the 365-Day Done Right Promise and the Cedarwell Care Promise, which means a written price before we start and a photo of the clean-up before we leave.
If you’re in Kissimmee and run into the same Trane issues, we offer the same depth of service there through our Trane service in Kissimmee page.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Orlando
Here’s what we actually find when we open up Trane systems in Orlando homes. These are the failures that repeat across neighborhoods like Waterford Lakes, Conway, and Dr. Phillips:
- Trane slab coil biofilm from Orlando humidity. Trane’s dense, slab-style evaporator coils collect a heavy biofilm of dust and Orlando humidity. The result is a musty odor every time the AC cycles on, plus reduced airflow that can fool a homeowner into thinking the refrigerant is low. We clean the coil in place with pH-neutral foaming agents and catch what drains out, then video-inspect to confirm the fins are clear.
- Hyperion coil freeze-ups from fine construction dust. In Trane Hyperion air handlers, the all-aluminum evaporator coil’s tight fin spacing traps fine construction dust from 1990s suburban homes. During Orlando’s humid summer nights, that dust holds moisture against the coil and it freezes. Pulling and cleaning the coil restores airflow and stops the freeze-thaw cycle that leads to water damage.
- Variable-speed blower wheels coated with attic insulation. Trane’s variable-speed blower motors pull fine attic insulation particles into the return side. Those particles coat the blower wheel, throw it out of balance, and cause vibration and bearing wear. We clean the wheel and housing with compressed air and soft brushes, then check static pressure to make sure the system is moving air the way Trane designed it to.
- Collapsed flex duct in 1990s attics. In neighborhoods like Conway and Pine Hills, techs often find original flexible ductwork from the 1990s has collapsed or been crushed in the attic by stored boxes. This severely reduces airflow to second-floor bedrooms. We video-inspect the full run, replace crushed sections with R-8 insulated flex, and seal the connections with mastic.
- Factory filter drier collecting debris after renovations. Trane’s factory-installed filter drier can become a collection point for debris after ductwork renovations. That debris contributes to pressure drops we find during video inspections. If the drier is clogged, cleaning alone won’t fix the restriction, and we’ll show you the video evidence before recommending a replacement.
Trane Service in Orlando: What Local Conditions Mean for Your Equipment
Here’s something unique to Orlando that most duct cleaners never consider. Unlike coastal or newer communities, Orlando’s Pine Hills and Conway neighborhoods have a high concentration of 1990s-era Trane systems with original flexible ductwork that collapses in vented attics when homeowners store boxes or holiday decorations on top. This is something we rarely see in Lake Nona’s newer, truss-framed homes, where attic space feels more like a room and people don’t stack storage bins on duct runs. The difference matters because a crushed duct in a Pine Hills attic doesn’t just reduce airflow. It forces the Trane blower to work against higher static pressure, which stresses the motor and makes the coil run colder than it should. The fix isn’t just cleaning; it’s identifying the crushed section, replacing it with properly supported R-8 flex, and then cleaning the coil and blower so the whole system starts fresh. In Orlando’s older housing stock, a duct cleaning that ignores the attic reality above the ceiling is only half a job.
Trane Models & Products We Service in Orlando
We maintain and clean the full range of Trane residential equipment common in Orlando homes, including the Trane XV20i variable-speed heat pump, the Trane XR14 air conditioner, Trane Hyperion air handlers, and Trane RunTru ducted split systems. On the parts side, we use OEM Trane filters, gaskets, and access panels whenever possible, because aftermarket panels rarely sit flush and a gap in the panel means air bypassing the filter. For duct sealing and insulation, we use commercial-grade mastic and closed-cell foam, which hold up far better in Orlando’s humid attics than the builder-grade tape and thin insulation many homes came with. We keep a local stock of common Trane filter sizes and gaskets so most Orlando service visits don’t wait on a parts order.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Orlando
Trane air duct cleaning in Orlando typically falls between $425 and $780 for a full system on a single-family home. Several things move the number: how many supply and return runs the house has, whether the Trane coil and blower wheel need to be opened up for cleaning, and whether we find crushed or disconnected flex duct that needs repair. A free estimate from Mortons Air Duct Orlando includes a visual inspection of the air handler, a look at accessible duct runs, and a written price before any work starts. That’s the Cedarwell Care Promise, and it’s on every job. If you want an exact number for your Trane system, call (321) 204-8194 and we’ll schedule a visit.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Orlando
The musty smell on startup is almost always biofilm on the evaporator coil. Orlando’s humidity condenses on the coil whenever the system runs, and that moisture mixes with dust to form a thin organic layer that smells like a damp basement. A Trane XR14’s coil runs cold, so it collects that film faster than a less efficient system would. Cleaning the coil with a pH-neutral foaming agent removes the biofilm and the smell. Call (321) 204-8194 and we’ll inspect yours.
Yes, in most cases we clean the Hyperion’s all-aluminum coil in place. We access the coil through the air handler’s service panel and apply a foaming cleaner that breaks down the dust and biofilm between the fins, then we rinse it and catch the runoff. Removing the coil is only necessary if it’s heavily matted or if we need to reach the blower wheel behind it. We’ll tell you which approach your system needs before we start.
If you’ve changed the filter and the system still makes a low rumbling or vibration sound, the blower wheel is likely coated with dust and attic insulation particles. Trane’s variable-speed blower motors are picky about wheel balance, and even a thin coating on the wheel blades can throw them off. A video inspection of the blower housing tells us for sure. It’s a fast check, and it’s part of our standard cleaning visit.
Yes, and Conway is a neighborhood where this comes up often because of the 1990s-era flex duct in vented attics. When we seal the duct connections with mastic after a cleaning, we stop conditioned air from leaking into the attic. That means more of the air your Trane system produces actually reaches the second-floor bedrooms. If the ducts are crushed or disconnected, we’ll repair those sections first, then seal and re-test the pressure. For an exact scope and price, call (321) 204-8194.
Yes, and it’s the difference between cleaning ducts and understanding the machine attached to them. A generic cleaner may run a vacuum through the registers and call it done. We open the Trane air handler, clean the coil and blower wheel, inspect the duct runs with a camera, and seal connections where air is escaping. We know Trane’s coil and blower designs, and we know how Orlando’s humidity affects them. That’s why Paul Adeyemi built Mortons Air Duct Orlando the way he did: we tell you what we found, what we will do, and what it costs – before we start.
Service Areas Near Orlando
We serve Trane owners throughout the greater Orlando area, including Kissimmee, Clermont, Oviedo, Sanford, and neighborhoods like Pine Castle. If your home is in Clermont, take a look at our Trane service in Clermont page for local details. For everything else, the Orlando service area page has the full coverage map.
Book Your Trane Service in Orlando Today
If your Trane system is blowing weak, smelling stale, or short-cycling, let’s get it inspected. Call (321) 204-8194 and a real person will answer. We’ll schedule the visit, give you a written price, and leave your home cleaner than we found it, with photos to prove it.
Written by Paul Adeyemi, Owner at Mortons Air Duct Orlando, serving Orlando since 2005.